Grandstream Networks HT701 User Manual page 34

IP Address There are two modes to operate the HT70X:
DHCP mode: all the field values for the Static IP mode are not used (even though
they are still saved in the Flash memory.) The HT701 acquires its IP address from
the first DHCP server it discovers from the LAN it is connected. Using the PPPoE
feature: set the PPPoE account settings. The HT70x will establish a PPPoE
session if any of the PPPoE fields is set.
Static IP mode:
address, 1
Server, 4
DHCP hostname Default is blank. This option specifies the name of the client. This field is optional
but may be required by some Internet Service Providers.
DHCP domain Default is blank. This option specifies the domain name that client should use
when resolving hostnames via the Domain Name System.
DHCP vendor class Default is HT7XX. Used by clients and servers to exchange vendor-specific
ID information..
PPPoE account ID PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point
Protocol over Ethernet) connection.
PPPoE password PPPoE account password.
PPPoE Service Name Default is blank. This field is optional. If your ISP uses a service name for the
PPPoE connection, enter the service name here.
Preferred DNS server The preferred DNS Server to be used
Time Zone Controls how the date/time is displayed according to the specified time zone.
configure the IP address, Subnet Mask, Default Router IP
st Preferred DNS Server, 2
th Preferred DNS Server. These fields are set to zero by default.
HT70X User manual
Version 1.0.9.4
nd Preferred DNS Server, 3 rd Preferred DNS
P a g e | 33