Models - Graco 262927 Instructions Manual

Models

Models
Models Models
Includes Includes Includes 9 9 9 : : :
Pump installed on Cart
24T837 1
Basic Spare Parts Kit
(included in tool box)
Feed Hopper 24T853
Standard 35 ft (1.7 m)
Hose Bundle 24T852
Flex Applicator 24T947
HTX 680 Manifold
Applicator 24U209
Additional Spare Parts
Additional 25 ft (7.6 m)
Hose Kit 24R254 8
1 Includes air motor, stainless steel pump lower, zero cavity relief valve, 1 in. male camlock outlet, air controls,
and the two wheel cart.
2 Includes gaskets for cam and groove fittings, complete pump repair soft seal kit, and pilot tube repair fittings.
3 Includes 10 gallon (38 liter) stainless steel hopper, hopper mounting, straight and 90 degree 2 inch female
cam lock outlet.
4 Fluid hose portion of kit includes 1 in. x 25 ft fluid hose, 3/4 x 10 ft fluid whip hose, stainless steel shut off ball
valve, and fluid cam lock ends. Air line portion of kit includes 38 ft air line with pump pilot line, air line quick
disconnects, and mesh wrap. Includes 6 mil polyurethane bag tubes for fluid lines and air lines.
5 Flex applicator includes 23 in. (58 cm) flexible hose with cam lock fluid inlet, angled spray head, spray air
volume control, spray air shut off valve, and motor pilot signal control valve, adjustable position center air
injection tube, rubber tip retainer, and include 3 tip sizes. Flex applicator is for use in low pressure spraying of
materials that pack out easily and that will be finish-troweled.
6 HTX 680 includes cam lock fluid inlet, angled aluminum spray head, spray air volume control, spray air shut
off valve, and motor pilot signal control valve. HTX 680 uses venturi-type air injection fluid nozzles and
aluminum screw on tip retainer. Includes four nozzle sizes, a Fine Finish adapter, and four Fine Finish tips.
HTX 680 is for use in medium pressure spray of materials that do not pack out easily.
7 Additional spare parts option includes flex applicator and pole applicator parts (rubber retainer, 3/16, 4/16,
8/16, 9/16 in. tips, and air tube o-ring), HTX applicator parts (nozzle retainer and 4 mm, 6 mm, 8 mm, 10 mm
nozzles and 1/8, 1/4, 3/8, 5/16 in. Fine Finish discs, air check valve, and spool o-rings), and pump rebuild kit.
8 Extends total length to 60 ft (18.3 m). Includes 25 ft x 1 in. fluid hose with cam lock fluid fittings, and 25 ft air
hose assembly with hose quick disconnects and pilot tube.
9 See Parts, page 38, for details regarding what is included with each model.
6
262927 262927 262927 262909 262909 262909
✔ ✔
2
✔ ✔
3 ✔ ✔
✔ ✔
4
5 ✔
✔ ✔
6
7 ✔
✔
Model Model Model
262926 262926 262926 24T834 24T834 24T834
✔ ✔
✔ ✔
✔
✔ ✔
✔
✔
24T835 24T835 24T835 24T836 24T836 24T836
✔ ✔
✔ ✔
✔
✔
✔
24T837 24T837 24T837
✔
✔
332612C