Sony Ericsson HBH-10 User Manual page 12

HBH10-R3A-PRINT.BOOK Page 12 Tuesday, October 3, 2000 2:26 PM
Using an Ericsson Phone with Built-in Bluetooth
Capability
You pair the Headset with your phone by adding it to a list of
paired devices in the phone. They then recognize each other when
they connect.
To pair the Headset with the phone
1. In the phone, scroll to Extras,
Paired devices,
2. A list of device types that you can pair with your phone is shown.
Scroll to Headset and press
3. With the Headset turned off, press and hold the Headset button
for up to 10 seconds until the indicator light on the Headset
flashes green and red. Make sure the Headset and the phone
are not too far apart.
4. Enter the Headset passkey and press
searching for the Headset.
5. When the search is complete, the display shows a list of available
devices. Scroll to HBH and then press
6. You may now replace the given Headset name with a personal
name tag and then press
the Headset indicator light flashes green.
Using an Ericsson Phone with a Bluetooth Adapter
Attached
You pair the Headset with your phone adapter by adding it to a
list of paired devices in the phone. They then recognize each other
when they connect.
To pair the Headset with the phone adapter
1. Attach the Bluetooth adapter to the phone and turn on the phone.
2. Scroll to Extras,
Paired devices,
asked to prepare the Headset for pairing.
3. With the Headset turned off, press and hold the Headset button
for up to 10 seconds until the indicator light on the Headset
flashes green and red. Make sure the Headset and the phone
are not too far apart.
4. Press
12 Using Your Headset
Y E S
, Add device?,
Y E S
Y E S
. When pairing has been completed,
Y E S
, Accessories,
Y E S
, Headset,
Y E S Y E S
on the phone. The pairing procedure starts.
Y E S
, Bluetooth, ,
Y E S
, Phone initiates,
Y E S Y E S
.
. The phone starts
Y E S
.
Y E S
, DBA-10,
,
Y E S Y E S
, Add device?. You are then
.