Product Description; Specifications - Shindaiwa 89309 Owner's/Operator's Manual

Product Description

Blade protector
Cutter blades
WARNING!
Do not alter this machine
or any of its components!
Model
Engine Type
Engine Bore x Stroke
Engine Displacement
Unit Weight, Less Fuel
Unit Dimensions (LxWxH)
Max. Power
Recommended idle speed
Fuel Tank Capacity
Fuel/oil ratio
Carburetor
Ignition
Spark Plug
Electrode Gap
Torque
Air Cleaner
Muffler Type
Starting Method
Stopping Method
Blade Length
Blade Type
Clutch Type
Gear Type
Gear Lubrication
Standard Equipment
EPA Emission Compliance Period*
Specifications are subject to change without notice.
Front handle
On/Off Switch
Recoil
starter
Fuel tank
HT231-30
5.9 kg (13.0 lb)
990 x 210 x 210 mm
740 mm
Rear handle w/integral controls, anti-vibe mountings, front handle w/guard, tool set, blade scabbard.
* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours
for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermedi-
ate) and A = 300 hours (Extended).
Throttle
interlock
Throttle
2-cycle, horizontal cylinder, air cooled
32 mm x 28 mm
22.5cc
1.1 hp @ 8000 min-1 (rpm)
3,000 (±250) min-1 (rpm)
0.6 liter/20.3 oz.
50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing Oil
Walbro WYJ, Diaphragm type
Fully electronic, transistor controlled
Champion CJ8Y
1.6 - 0.7 mm/ .024 -.028 "
170-190 kg cm / 17-19 N∙m
Foam element
2-stage catalyst
Recoil type
Slide switch,grounding type
Double-blade cutting action: single-edged blade
Centrifugal clutch, dry-type
Spur gears
Lithium-based grease
Category A
Using the illustration as a guide,
familiarize yourself with this
unit and its various components.
Understanding your machine
helps ensure top performance,
longer service life, and safer
operation.
Rear
handle
Blade
protecter
Guard
HT231-40
6.4 kg (14.1 lb)
1330 x 210 x 210 mm
1080 mm
5