Product Description; Specifications - Shindaiwa 81188 Owner's/Operator's Manual

Product Description

C3410 BRUSHCUTTER
Gear Case
Brushcutter Blade
Figure 4
Specifications C3410
C3410 dry weight
(less attachments) ............. ......................................14.1 lb./6.4 kg
Engine model.....................................................................SF3410E
Engine type ........................ ........
Bore x stroke ..................... ......................1.5 x 1.2 in./38 x30 mm
Displacement ..................... ..................................2.1 cu. in./ 34 cc
Maximum power ............... .....................................1.4 HP/1.0 kW
Fuel/oil ratio ...................... .....50:1 with ISO-L-EGD or JASO FC
Carburetor type ................. ...........Walbro WYL, diaphragm-type
Fuel tank capacity ............. ....................................23.7 oz./700 ml
Ignition ............................... ..........................One-piece electronic,
Spark plug .......................... ......................................NGK CMR5H
Specifications are subject to change without notice.
This unit comes fully assembled with the
exception of the handlebar cutting attach-
ment shield and cutting attachment.
Prior to Assembly
Before assembling, make sure you have all
the components required for a complete
unit and inspect unit and components for
any damage.
Throttle
Trigger
Outer Tube
Cutting
Attachment Shield
with Power Boost Chamber
@ 8,000 RPM (min
-1
class 2-cycle mixing oil*
program-controlled
 Engine/Outer tube assembly
 Handlebar and Throttle assembly
 Cutting attachment
 Kit containing cutting attachment shield
mounting bracket and hardware, this
owner's/operator's manual and tool kit
for routine maintenance. Tool kits
vary by model and may include a hex
wrench set, a spark plug/screwdriver
combination wrench, and a spanner.
Ignition
Throttle
Switch
Interlock
Hanger
Handle Bar
Air cleaner type ................. .....................Non-reversible heavy-duty
Starting method ................ .......................................................Recoil
Stopping method ............... .............................................Slide switch
Transmission type ............. ................Automatic, centrifugal clutch
EPA Emission
Compliance Period**.......................................................Category A
)
** The EPA emission compliance referred to on the emission compliance
label located on the engine, indicates the number of operating hours for
which the engine has been shown to meet Federal emission requirements.
Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A =
300 hours (Extended).
* meets or exceeds these specifications and is
recommended for all Shindaiwa products.
Spark Plug
Muffler
Fuel
Tank
Using the accompanying illustrations as
a guide, familiarize yourself with this unit
and its various components. See Figure 4.
Understanding your unit helps ensure top
performance, long service life, and safer
operation.
WARNING!
Do not make unauthorized modifica-
tions or alterations to any of these units
or their components.
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
filter element
w/bevel gear
5