Installation; Connections - Sherwood RV-4060R Operating Instructions Manual

Sherwood audio/video receiver operating instructions
Table of Contents

Advertisement

Please make the following connections (where applicable).
Notes!
– SWITCH OFF THE RECEIVER BEFORE MAKING ANY

CONNECTIONS.

– Do not connect the receiver to the wall socket when
making connections.
– Be sure to connect the white plugs to the L (left) and the
red plugs to the R (right) jacks when making connections.
FM
(OUTDOOR ANTENNA)
FM
(INDOOR ANTENNA)
CONNECTIONS
1. FM INDOOR ANTENNA
Connect the supplied antenna to the FM antenna
terminals, as shown.
Change the position of the antenna until you get the best
reception of your favorite FM stations.
FM OUTDOOR ANTENNA
A 75 outdoor FM antenna may be used to further
improve the reception.
Disconnect the indoor antenna before replacing it with
the outdoor one.
2. AM LOOP ANTENNA
Tune in your favorite AM station and position the loop
antenna for best reception. Try other stations and find the
position that gives best overall reception. When this unit
is mounted in a rack or placed on a shelf with insufficient
space behind, hang the antenna on a wall in the direction
which gives best reception.
3. AUDIO IN/OUT
– CD IN – input jacks for connecting a Compact Disc
player.
Connect these jacks to the OUTPUT jacks of the CD
player.
– TV/AUX IN – input jacks for connecting the fixed audio
output jacks of a TV set or any other source you want to
hear; an additional CD player, a cassette deck, a VCR or
a turntable with ceramic cartridge, etc.
AM
4
Manufactured under lincense from Dolby Laboratories.
Manufactured under lincense from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks
Dolby, Pro Logic, and the double-D symbol are trademarks
of Dolby Laboratories.
of Dolby Laboratories.
VCR 1
VCR 1
FM
FM
FM
FM
AM
AM
IN
IN
OUT
OUT
MONITOR
MONITOR
300
300
75
75
LOOP
LOOP
OUT
OUT
ANTENNA
ANTENNA
CD
CD
TV/AUX
TV/AUX
VCR 1
VCR 1
TAPE MON.
TAPE MON.
PLAY
PLAY
REC
REC
PLAY
PLAY
REC
REC
MODEL NO. RV-4060R
MODEL NO. RV-4060R
AUDIO/VIDEO RECEIVER
AUDIO/VIDEO RECEIVER
L
L
R
R
SER. NO.
SER. NO.
1 2
3
Important note for connecting equipment that does
not have IN/OUT markings on the input and output
jacks:
RV -4060R
Device to be connected e.g. cassette deck.
PLAY →
PLAY or OUT
REC
REC or IN
5
6
7
DIGI LINK
DIGI LINK
REAR SPEAKERS(4 )
REAR SPEAKERS(4 )
+
+
-
-
R
R
-
-
L
L
SUB
SUB
WOOFER
WOOFER
FRONT SPEAKERS(8 )
FRONT SPEAKERS(8 )
CENTER
CENTER
MAIN
MAIN
E85649
E85649
R
R
29Z3
29Z3
+
+
LISTED
LISTED
R
R
AUDIO EQUIPMENT
AUDIO EQUIPMENT
This device complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(1)This device may not cause harmful interference,and
DESIGNED IN USA
DESIGNED IN USA
(2) this device must accept any interference received,
(2) this device must accept any interferencereceived,
ASSEMBLED IN CHINA
ASSEMBLED IN CHINA
including interference that may causeunderired operation.
including interference that may causeunderired operation.
-
-
R
R
8
CONNECTIONS
– VCR 1 PLAY/REC – PLAY(input) and REC(output) jacks
for connecting the audio OUTPUT and INPUT jacks of a
Hi-Fi stereo VCR and output jacks for extra sound
recording equipment .
Connect the PLAY jacks to the AUDIO PLAY or
OUTPUT jacks of the VCR.
Connect the REC jacks to the AUDIO REC or INPUT
jacks of the VCR.
Note : The audio and video inputs and outputs of the VCR
must be connected to allow the VCR 2/CAMCORDER
inputs on the front of the receiver to be used for recording
input.
– TAPE MON PLAY/REC – PLAY(input) and REC(output)
jacks for connecting a cassette deck, a Digital Compact
Cassette deck or another digital recording device.
Connect the PLAY jacks to the PLAY or LINE OUTPUT
jacks of the deck.
Connect the REC jacks to the REC or LINE INPUT jacks
of the deck.
These PLAY and REC jacks may also be connected to
the LINE OUTPUT and INPUT jacks of an audio
processor such as an optional graphic equalizer or a
Digital Signal Processor.

INSTALLATION

10
AC INPUT
AC INPUT
~120V/60Hz
~120V/60Hz
140W
140W
+
+
WARNING: "SHOCK HAZARD-DO NOT OPEN"
WARNING: "SHOCK HAZARD-DO NOT OPEN"
AVIS: "RISOUE DE CHOC-ELECTRIQUE-NE PAS OUVRIR"
AVIS: "RISOUE DE CHOC-ELECTRIQUE-NE PAS OUVRIR"
AC OUTLET
AC OUTLET
L
L
+
+
SWITCHED
SWITCHED
~120V/60Hz
~120V/60Hz
1A MAX 100W
1A MAX 100W
-
-
CAUTION: USE 8 OHM MIN SPEAKERS.
CAUTION: USE 8 OHM MIN SPEAKERS.
L
L
ATTENTION: UTILIZER DES HAUT-PARLEURS 8 OHM MIN.
ATTENTION: UTILIZER DES HAUT-PARLEURS 8 OHM MIN.
9
11
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-4060

Table of Contents