Fm 75 Ohms Antenna Jack B; Am Antenna Ground Terminal; Am Loop Antenna Terminal; Speaker Light-Up Jack - Sharp CD-ES777 Operation Manual

Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the
FM 75 OHMS jack and position the FM
antenna wire in the direction where the
strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the
AM and GND terminals. Position the
AM loop antenna for optimum
reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
< Assembling >
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
AM loop
FM
antenna antenna
Black
White
ANTENNA
FM
GND AM
Caution:
75 OHMS
< Attaching to the wall >
Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
jacks for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control for
Wall Screws (not supplied)
2 seconds or more.
Note:
Placing the right speaker light-up wire to the RIGHT jack and the left
speaker light-up wire to the LEFT jack.
Speaker connection
AC INPUT
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Speaker Light-Up Connection
AC INPUT
CD-ES777
Red
Black
Incorrect
LEFT SPEAKER RIGHT SPEAKER
11