Table of Contents
Advertisement
! Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS terminal and
position the FM antenna wire in the direction where the strongest
signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wall with screws (not sup-
plied).
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
< Assembling >
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
" Use speakers with an impedance of 6 ohms or more, as lower im-
" Do not mistake the right and the left chan-
" Do not let the bare speaker wires touch
" Do not allow any objects to fall into or to be
" Do not stand or sit on the speakers. You may
! Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when you
< Attaching to the wall >
remove the speaker grilles.
Wall
Screws (not supplied)
Red
pedance speakers can damage the unit.
nels. The right speaker is the one on the right
side when you face the unit.
each other.
placed in the bass reflex ducts.
be injured.
XL-HP707
Black
Incorrect
11
Advertisement
Table of Contents
