Table of Contents
Advertisement
Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS terminal and po-
sition the FM antenna wire in the direction where the strongest signal
can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the AM
loop antenna for optimum reception. Place the AM loop antenna on
a shelf, etc., or attach it to a stand or a wall with screws (not sup-
plied).
ANTENNA
AM
FM
LOOP
GND
75 OHMS
VIDEO/AUX
IN
RIGHT
LEFT
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT
LEFT
SUBWOOFER
PRE-OUT
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
ANTENNA
AM
FM
LOOP
75 OHMS
GND
VIDEO/AUX
IN
RIGHT
LEFT
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
SUBWOOFER
RIGHT
LEFT
PRE-OUT
Caution:
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragm when you
remove the speaker grilles.
Red
Black
Incorrect
XL-MP131
11
Hide quick links:
Advertisement
Table of Contents
