Table of Contents
Advertisement
Listening to the radio (continued)
CD-ES777
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 21.
2
Press the MEMORY button to enter the preset tuning sav-
ing mode.
3
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized will be erased.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
22
To recall a memorized station
Press the PRESET (
select the desired station.
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1 Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
station is located.
or
) button to
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the power standby
mode.
2 While pressing down the
the TUNER(BAND) button until "TUNER CL" appears.
or
) button for less than 0.5 seconds to
or
) button for more than 0.5 seconds.
or
) button again when the desired
button and the
button, press
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
