Operational Problemes; Troubleshooting - Jøtul F 232 Installation And Operating Instructions Manual

Table of Contents

Advertisement

N/A
VÆGT:
N/A
AREAL:
When remounting the lateral plates, please be careful that
the silicone rings (J) do not fall out!
Jøtul F 230
NAVN:
MATERIALE:
M3 NR.:
DIM.:
J
90230167
TG.NR:
01-03-2018
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg©
Udskiftning sideglas (støjdæmper)
EMNE:
N/A
AREAL:
8.0 Operational problems -

troubleshooting

Poor draught
Check the length of the chimney and that it complies with
national laws and regulations. (See also «2.0 Technical
data» and «4.0 Installation» (Chimney and flue pipe)
Make sure that the minimum cross section on the
chimney is according to «2.0 Technical data»
Make sure that there is not anything preventing the
smoke gases from escaping: branches, trees, etc.
Upon suspicion of excessive/poor draught in the chimney,
seek professional help for measurement and adjustment
The fire extinguishes after a while
Make sure that the firewood is sufficiently dry
Find out whether there is negative pressure in the house,
close mechanical fans and open a window close to the
fireplace
Check that the air vents are open
Check that the flue outlet is not clogged by soot
Unusual amount of soot accumulates on
the glass
Some soot will always stick to the glass, but the quantity
depends on:
J
Moisture in the fuel
The local draught conditions
The air vents opening
Most of the soot will normally burn off when the air vents are
opened all the way, and a fire is burning briskly in the fireplace.
jm
N/A
01-03-2018
DATO:
VÆGT:
90230167
TG.NR:
jm
SIGN:
A
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F 233F 234F 235F230 series

Table of Contents