Operational Problems - Troubleshooting; Optional Equipment; Recycling - Jøtul F 400 ECO Installation And Operating Instructions Manual

ENGLISH
Fig. 23d
5. Angle the valve to the left.
6. When refi tting, follow the same procedure in reverse order.
7. Check if the valve is positioned correctly in relation to the
handle (fi g. 23b).
8.0 Operational problems -
troubleshooting
Poor draught
Check the length of the chimney and that it complies with
national laws and regulations. (See also «2.0 Technical
data» and «4.0 Installation» (Chimney and fl ue pipe) in the
installation manual for information.)
Make sure that the minimum cross section on the chimney is
according to «2.0 Technical data» in the installation manual.
Make sure that there is not anything preventing the smoke
gasses from escaping: branches, trees, etc.
Upon suspicion of excessive/poor draught in the chimney,
seek professional help for measurement and adjustment.
The fi re extinguishes after a while
• Make sure that the fi rewood is suffi ciently dry.
• Find out whether there is negative pressure in the house,
close mechanical fans and open a window close to the
fi replace.
• Check that the air vent is open.
• Check that the fl ue outlet is not clogged by soot.
Unusual amount of soot accumulates on
the glass
Some soot will always stick to the glass, but the quantity
depends on:
• Moisture in the fuel.
• The local draught conditions.
• Air vent opening.
Most of the soot will normally burn off when the air vent is
opened all the way and a fi re is burning briskly in the fi replace.
16

9.0 Optional equipment

9.1 Heat shield rear
Cat. no: 50012949 Black paint (BP)
Cat. no: 50012950 Aluzink
See manual: 10026623
9.2 External air kit Ø 80
Cat. no: 51047509
See manual: 10047508
9.3 Self closing door mechanism
Cat. no: 10025474
See manual: 50035414
9.4 Short legs - height 155 mm
1 piece:
Cat. no: 12015095 - Black paint (BP)
Cat. no: 12015093 - Blue black emael (BBE)
Cat. no: 12028848 - Noble white enamel (IVE)
Cat. no: 12028851 - Brown majolica enamel (BRM)
4 piece:
Cat. no: 51012177 - Black paint (BP)
Cat. no: 51012178 - Blue black enamel (BBE)
Cat. no: 51012179 - Noble white enamel (IVE)
Cat. no: 51012279 - Brown majolica enamel (BRM)

10.0 Recycling

10.1 Recycling packaging
Your fi replace is delivered with the following packaging:
• A wooden pallet that can be cut up and burned in the
fi replace.
• Cardboard packaging that should be taken to a local
recycling facility.
• Plastic bags that should be taken to a local recycling facility.
10.2 Recycling the fi replace
The fi replace is made of:
• Metal that should be taken to a local recycling facility.
• Glass that should be disposed of as hazardous waste.
The glass in the fi replace must not be placed in a regular
source segregation container.
• Vermiculite burn plates that can be disposed of in regular
waste containers.