Shifting The Projected Image Vertically (Digital Shift); Setting On-Screen Display; Setting The Video System; Capturing Projected Images - Sharp XG-P610X Operation Manual
Conference series
Hide thumbs
Also See for XG-P610X:
- Installation (4 pages) ,
- Setup manual (59 pages) ,
- Operation manual (86 pages)
Table of Contents
Advertisement
3 3 3 3 3 Shifting the Projected
Image Vertically (Digital
Shift)
For easier viewing, this function shifts the im-
age projected on the screen up or down elimi-
nating either the upper or lower black band found
in 16:9 and other wide aspect ratios.
Press \
Shifts the projected image
down.
Note
• This function will not work depending on the type
of resize mode. See pages
4 4 4 4 4 Setting On-screen Display
This function allows you to turn the on-screen
messages on or off.
Selectable items
All on-screen displays are displayed.
Normal
Level A
INPUT/VOLUME/MUTE/FREEZE/AUTO
SYNC/MAGNIFY/ "An invalid button has
been pressed." are not displayed.
Level B
All on-screen displays are not displayed (ex-
cept the menu, H&V LENS SHIFT, KEY-
STONE, FOCUS, ZOOM, "All buttons on Pro-
jector are locked." and warning displays).
Note
• When "Keylock Level" is set to "Level A" or "Level
B", pressing STANDBY displays "All buttons on
Projector are locked." regardless of the "OSD
Display" setting.
Press |
Shifts the projected image
up.
39
and
40
for details.
Description
Menu operation
5 5 5 5 5 Setting the Video System
The video input system mode is factory preset
to "Auto"; however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Selectable items
PAL (50/60 Hz)
When connected to PAL video equipment.
SECAM
When connected to SECAM video equipment.
NTSC4.43
When reproducing NTSC signals in PAL
video equipment.
NTSC3.58
When connected to NTSC video equipment.
Note
• The video signal can only be set in VIDEO or
S-VIDEO mode.
• When "Video System" is set to "Auto", you may
not receive a clear picture due to signal differ-
ences. Should this occur, switch to the video
system of the source signal.
• While "Video System" is set to "Auto", when
PAL-M or PAL-N signal is input, the image from
PAL signal will be displayed.
6 6 6 6 6 Capturing Projected Images
This projector allows you to capture projected
images (RGB signals) and set them as a startup
image, or background image when no signals are
being received.
Note
• Images can be captured only when they are from
XGA (1024 × 768) non-interlace signals in COM-
PUTER1/2, DVI or HDMI mode with "RESIZE"
set to "Normal".
• The saved image is reduced to 256 colors.
• Images from equipment connected to VIDEO
or S-VIDEO terminal cannot be captured.
• Only one image can be captured and saved.
• The color of images may differ before and after
saving if an image is captured on which image
adjustment has been performed using the
"C.M.S." function.
• To delete the captured image, select "Delete",
and then press ENTER.
Page
47
Description
-57
Advertisement
Table of Contents
