Correcting Trapezoidal Distortion - Sharp XG-P610X Operation Manual

Image Projection

Correcting Trapezoidal Distortion

When the image is projected either from the top or from the bottom towards the screen at an angle,
the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion is called
There are the two types of the Keystone Correction.
1) "GEOMETRIC ADJUSTMENT" for correcting an image designating the corner of the projected im-
age
2) "H&V KEYSTONE" for designating the correction of the horizontal and vertical axes
Selecting the Type of the
Correction
Select the type of the keystone correction.
Press KEYSTONE on the projector or on
the remote control.
• "GEOMETRIC ADJUSTMENT" will be dis-
played.
• Each time KEYSTONE is pressed, the display
toggles as follows:
GEOMETRIC
→
ADJUSTMENT
↑
The display ←
disappears.
GEOMETRIC For correcting an image desig-
ADJUSTMENT nating the corner of the pro-
jected image
H&V KEYSTONE For correcting an image desig-
nating the horizontal or vertical
axes
IMAGE RESIZING For correcting the image dis-
tortion which cannot be cor-
rected with "H&V KEY-
STONE".
*Only when "H&V KEY-
STONE" is set to the values
other than "0", "IMAGE
RESIZING" can be adjusted.
(This function cannot be used
when correcting with "GEO-
METRIC ADJUSTMENT".)
-32
H&V KEYSTONE
IMAGE RESIZING *
Keystone
KEYSTONE
button
Correction.
Mouse/adjustment
button (
ENTER button
UNDO button
KEYSTONE
button
Adjustment
button ('/"/\/|)
ENTER button
UNDO button
' / " / \ / | )