Adjusting The Focus; Adjusting The Projected Image Size - Sharp Conference Series Operation Manual

Image Projection (Continued)

Adjusting the Focus

Press FOCUS +/– on the remote
control to adjust the focus.
ROn-screen display
FOCUS
TESTPATTERN
Info
• It is recommended that the focus be adjusted
after the projector has warmed up for at least
30 minutes.
Adjusting the Projected
Image Size
Press ZOOM +/– on the remote
control to adjust the projected image
size.
ROn-screen display
ZOOM
TESTPATTERN
Note
• After you have pressed FOCUS or ZOOM on
the remote control, you can display the test
pattern by pressing ENTER. The test pattern
is useful for making more accurate
adjustments.
• For fi ne adjustments, when H&V SHIFT,
FOCUS or ZOOM is pressed, the projected
image moves a small amount in the desired
direction for approximately one second. Hold
down the buttons to move the projected
image quickly.
30
ZOOM buttons
FOCUS buttons