Using The Remote Control As A Wireless Computer Mouse - Sharp XG-P610X Operation Manual

Using the Remote Control

Using the Remote Control as a Wireless Computer Mouse

When connecting the optional remote re-
ceiver (AN-MR2) to the computer, you can
use the remote control as the wireless com-
puter mouse.
1
Connect the optional remote re-
ceiver to the USB terminal on the
computer.
2
Slide the ADJ./MOUSE
switch on the remote con-
trol to the MOUSE position.
3
Use the mouse function.
• Point the remote control at the remote
receiver.
■ When moving the cursor
Press '/"/\/|.
■ When left-clicking
Press L-CLICK.
■ When right-clicking
Press R-CLICK.
■ When your computer supports only a
one-click mouse (such as Macintosh
Press L-CLICK or R-CLICK. (L-CLICK
and R-CLICK have common function.)
Note
• This function only works with the Microsoft
Windows ® OS and Mac OS
tion does not work with the following operation
systems that do not support USB.
Versions earlier than Windows
•
Versions earlier than Windows
•
Versions earlier than Mac OS
•
• Confirm that the computer recognizes the USB
connection.
• While the remote control is connected to the
projector with a signal cable, you cannot use
the wireless computer mouse function.
-18
ADJ.
MOUSE
®
)
®
® . However, this func-
®
95.
®
NT4.0.
® 8.5.
Computer
To USB terminal
ADJ./MOUSE switch
Mouse/adjustment button ('/"/\/|)
R-CLICK button
L-CLICK button
Remote receiver