Sharp XG-P610X Operation Manual page 36

Image Projection
H&V KEYSTONE
1
Press KEYSTONE on the pro-
jector or on the remote control
repeatedly until "H&V KEY-
STONE" is displayed.
• When the correction has already been
made with "GEOMETRIC ADJUST-
MENT", the confirmation message for
resetting the correction before "H&V
KEYSTONE" is displayed, and then re-
set.
2
Press ' or " to parallelize the
left and right sides of the pro-
jected image.
3
Press \ or | to parallelize the
upper and lower sides of the
projected image.
4
Press KEYSTONE to display
"IMAGE RESIZING".
• Only when "H&V KEYSTONE" is set
to the values other than "0", "IMAGE
RESIZING" works.
-34
▼On-screen display
Vertical Keystone Correction
(Adjustment with
Horizontal Keystone Correction
(Adjustment with
▼On-screen display
' / "
)
\ / |
)