Resetting The Lamp Timer - Sharp XG-P20XU Operation Manual

Replacing the Lamp
7 Remove the lamp cage
cover.
Turn over the projector and
loosen the user service screw
that secures the lamp cage
cover. Then slide the cover in
the direction of the arrow.
User service screw
10 Attach the lamp cage
cover.
Slide the lamp cage cover in
the direction of the arrow. Then
tighten the user service screw.
User service screw

Resetting the lamp timer

1 Connect the power
cord.
Plug the power cord into the AC
socket of the projector.
• Reset the lamp timer only after replacing the lamp.
E-69
8 Remove the lamp
cage.
Remove the securing screws
from the lamp cage. Hold the
lamp cage by the handle and
pull it towards you.
Securing Securing
screw screws
2 Reset the lamp timer.
While pressing ƒ, © and
ENTER on the projector, press
POWER ON on the projector.
9 Insert the new lamp cage.
Press the lamp cage firmly into
the lamp cage compartment.
Fasten the securing screws.
"LAMP 0000H" is displayed,
indicating that the lamp timer is
reset.