Using the Operation Buttons
Selecting the Input Signal Source
Projector
Adjusting the Volume
Projector
Muting the Sound
Projector
E-39
GyroRemote
INPUT
GyroRemote
VOLUME
MUTE
Press INPUT again to change the mode.
You can use these tools by accessing the "Button Assign"
list on your GyroRemote. Choose popup list "5/5". (See
page
.)
33
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode
INPUT 2 Mode
INPUT 4 Mode
INPUT 5 Mode
Press VOLUME
/
to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
You can use this tool by accessing the "Button Assign"
list on your GyroRemote. Choose popup list "2/5" and
press Function (3). (See page
On-screen Display
INPUT 3 Mode
33
.)