Eco Mode (Setting The Eco Mode); Auto Power Off (Auto Power Off Function) - Sharp Notevision PG-B10S Operation Manual

Eco Mode
Mode)
Select " " (Eco Mode) or "
Mode) in "Eco Mode" on the "Options" menu.
Setting the menu screen
Example: "Options" menu screen for
INPUT 2 (S-Video) mode
Description of Eco Mode
Power consumption
Selectable settings Brightness
(When using AC 100V)
90%
(Eco mode)
100%
(Standard mode)
Note
• Although lamp life and noise are improved when
"Eco Mode" is set to "
ness decreases by 10%.
• "Eco Mode" is factory preset to "
mode).
(Setting the Eco
" (Standard
Page 34
Lamp life
Approx.
170 W
4,000 hours
Approx.
185 W
2,000 hours
" (Eco mode), bright-
" (Standard
Auto Power Off
Power Off Function)
When no input signal is detected for more than
15 minutes, the projector will automatically en-
ter the standby mode if set to "
The Auto Power Off function will be disabled if it
has been set to " " (OFF).
Select " " (ON) or "
Power Off" on the "Options" menu.
Setting the menu screen
Example: "Options" menu screen for
INPUT 2 (S-Video) mode
Note
• When the Auto Power Off function is set to "ON",
5 minutes before the projector enters the
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
(Auto
" (ON).
" (OFF) in "Auto
Page 34
-43