Table of Contents
Advertisement
Video System
Video System)
The video input system mode is preset to "Auto";
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select "Video System" on the "Options" menu
and the appropriate video system.
Description of Video Systems
Selectable settings
When connected to PAL video
PAL
equipment.
When connected to SECAM video
SECAM
equipment.
When reproducing NTSC signals in
NTSC4.43
PAL video equipment.
When connected to NTSC video
NTSC3.58
equipment.
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
(Setting the
Description
Background
Startup and Background Image)
Select "Background" on the "Options" menu
and the image displayed upon the
projector's startup and when no signal is
being sent to the projector.
Sharp
Blue
None
Description of Background Images
Selectable settings
Sharp
SHARP default image
Blue
Blue screen
None
Black screen
Note
• If the input signal has interference, the screen
will be displayed during interference.
Eco Mode
Mode)
Select "
" (Eco Mode) or "
Mode) in "Eco Mode" on the "Options" menu.
Description of Eco Mode
Power consumption
Selectable settings
Brightness
(When using AC 100 V)
80%
(Eco mode)
100%
(Standard mode)
Note
• Although lamp life and noise are improved when
"Eco Mode" is set to "
ness decreases by 20%.
• "Eco Mode" is factory preset to "
mode).
(Selecting a
Description
(Setting the Eco
" (Standard
Lamp life
190 W
4,500 hours
240 W
3,000 hours
" (Eco mode), bright-
" (Standard
-45
Advertisement
Table of Contents
