Replacing The Air Filter; Cleaning And Replacing The Air Filter - Sharp Notevision PG-B10S Operation Manual

Replacing the Air Filter

• This projector is equipped with air fil-
ters to ensure the optimal operating
condition of the projector.
• The air filters should be cleaned every
100 hours of use. Clean the filters more
often when the projector is used in a
dusty or smoky location.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA010WJZZ)
when it is no longer possible to clean.
Cleaning and Replacing
the Air Filter
1
Press
STANDBY
or on the remote control to
put the projector into the
standby mode.
Wait until the cooling fan stops.
2
Disconnect the power cord.
Unplug the power cord from the AC
socket.
3
Remove the filter cover.
Turn the projector over. Loosen the user
service screw (1) that secures the fil-
ter cover. Pressing the tab, remove the
filter cover (2).
on the projector
" " Bottom view " "
"
Air filter (not removable)
AC socket
1
2
Tab
" " Front view " "
"
Air filter (removable)
STANDBY button
STANDBY
STANDBY
button
User service screw
-61