Datalogic Magellan 1100i Instructions

Fixed mounting plate

Hide thumbs Also See for Magellan 1100i:

Download this manual

Fixed Mounting Plate Instructions

Securing the Fixed Mounting Plate

This sturdy plate can be used to mount the scanner in a number of positions;

either for new installations or to add to an existing system.

Countertop

New Installation

Determine the mounting location. The plate allows flexible, yet sturdy

mounting to a countertop, table, wall, or even under a counter. While

deciding on the best position, you might want to keep in mind the best

way to route the scanner cable (you may need to drill a hole for it).

Using two of the screws provided in the kit, securely fasten them down

through the plate in the position desired.

Magellan

Under Counter

R44-3042 (Rev. A)

1100i

Wall

3/10

Page 1 (you may need to drill a hole for it). Using two of the screws provided in the kit, securely fasten them down through the plate in the position desired. © 2009-2010 Datalogic Scanning, Inc. R44-3042 (Rev. A) 3/10...
Page 2 Unlatching: Grasp the scanner as shown and rotate the rear up and away from the stand to disengage the rear latch, then the opposite end away from the front latches. Latching Unlatching Front Latches Rear Rear Scanner Latch Latch © 2009-2010 Datalogic Scanning, Inc. R44-3042 (Rev. A) 3/10...