Thread Trimming Disable - Brother S-7250A Instruction Manual

4-6-2. Thread trimming disable

If thread trimming is set to be disabled, thread trimming will not be carried out even when the pedal is depressed backward.
1
Selecting "A02 Trdi" (thread trimming disable)
2
Press either.
3 Displaying the thread trimming disabled setting
value
Setting thread trimming to disabled or enabled
4
(Thread trimming
operation enabled)
5
Press the key.
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
In sewing standby mode, press the
down the
・ "A01 UPdn" will be displayed.
Press the
・ When the
・ When the
・ When the
・ When the D
・ When the C
・ When the
NOTE:
(Thread trimming
disable)
Setting mode will be exited and normal operation will be possible.
S-7250A
key to switch to function setting mode.
- +
/ keys to select "A02 Trdi".
+
key is pressed, the next setting is displayed.
-
key is pressed, the previous setting is displayed.
key is pressed, the setting value is displayed.
key is pressed, the "on" display will appear.
key is pressed, the "oFF" display will appear.
key is pressed, the initial value will be reset.
If the key is pressed once more, the
will switch off and the display will return to the setting item.
key while holding
1369D
1371D
indicator
1372D
26