2Nd Correction Pitch Setting; 2Nd Pitch Setting - Brother S-7250A Instruction Manual

4-12-2. 2nd correction pitch setting

Normally, correction sewing is carried out at the currently-set sewing pitch. However, when "Correction sewing at 2nd
correction pitch" or "Reverse correction sewing at 2nd correction pitch" is set for carrying out correction sewing, then correction
sewing is carried out at the pitch which is set below.
<Switching to correction 2nd pitch ratio screen>
1
Set to A34
2

4-12-3. 2nd pitch setting

If "2nd pitch" has been set and the hand switch is pressed during sewing, the stitch pitch will change to the pitch set as follows.
<Switching to 2nd pitch ratio screen>
1
Set to A33
2
Set the ratio.
Set the ratio.
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
In function setting mode, press the -
then press the key to select.
Press the D / C
current pitch.
The setting range is from 10% to 250%.
・ When the key is pressed, the initial value will be reset.
・ When the key is pressed, the mode returns to function
setting mode.
・ When the key is pressed, the mode returns to sewing standby
mode.
In function setting mode, press the -
then press the key to select.
Press the D / C
current pitch.
The setting range is from 10% to 250%.
・ When the key is pressed, the initial value will be reset.
・ When the key is pressed, the mode returns to function
setting mode.
・ When the key is pressed, the mode returns to sewing standby
mode.
S-7250A
/ + keys to set A34, and
keys to set the ratio with respect to the
/ + keys to set A33, and
keys to set the ratio with respect to the
1399D
1400D
1401D
1402D
52