Thread Wiping - Brother S-7250A Instruction Manual

4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

4-6-3. Thread wiping

You can set whether thread wiper operation is enabled or disabled.
1
Selecting "A03 Wip" (thread wiping)
2
Press either.
3 Displaying the thread wiping setting value
Setting thread wiping
4
(Thread wiping disabled) (Thread wiping enabled)
5
Press the key.
27
In sewing standby mode, press the
the key to switch to function setting mode.
・ "A01 UPdn" will be displayed.
- +
Press the / keys to select "A03 Wip".
+
・ When the key is pressed, the next setting is displayed.
-
・ When the key is pressed, the previous setting is displayed.
・ When the key is pressed, the setting value is displayed.
・ When the D key is pressed, the "on" display will appear.
・ When the C key is pressed, the "oFF" display will appear.
・ When the key is pressed, the initial value will be reset.
NOTE:
If the key is pressed once more, the
will switch off and the display will return to the setting item.
Setting mode will be exited and normal operation will be possible.
S-7250A
key while holding down
1369D
1373D
indicator
1374D