Installation Requirements - Wolf M Series Installation Manual

SPE C IF I CAT I ON S

Installation Requirements

The M series oven can be installed in a standard or flush
inset application. If a cooktop is being installed above an
oven, a minimum of 1 / " is required between units. Loca-
(6)
4
tion of the electrical supply within the oven opening may
require additional cabinet depth.
Finish the edges of the opening. They may be visible when
the door is open.
For standard installations, face trim will overlap stiles and
rails. Refer to the chart below.
For flush inset installations, a minimum
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
INS TA L L AT IO N R E QU I RE M E NT S
BA S E S U PP ORT
Single Oven
Double Oven
TRI M O VE RL AP
Top
Bottom
Sides
|
4 Wolf Customer Care 800.222.7820
D U AL IN STALL AT IO N
Two 30" single M series ovens can be installed side by side
in a standard or flush inset application. A dual installation kit
is required. To maintain appropriate airflow, the ovens must
be installed into one opening. Any cosmetic or structural
material placed between the ovens will impede airflow and
is not recommended. Refer to illustrations on the following
pages.
The dual installation kit is available through an authorized
Wolf dealer. For local dealer information, visit the find a
1 / " reveal is
(3)
8
showroom section of our website, wolfappliance.com.
M IN
250 lb
(115 kg)
400 lb
(181 kg)
1"
(25)
0"
(0)
11 / "
(18)
16