Yamaha GT1 Service Manual page 57

A. Removal
1 I
2)
Disconnect the chain joint and remove the
chain.
Fig. 5-2-2
Remove the cotter pin and then remove the
tension bar and brake rod from the rear shoe
plate.
3)
4)
CHASSIS -
Rear Wheel
Loosen the chain tension adjusting nuts and
bolts on both right and left sides.
Fig. 5-2-5
Remove the cotter pin, and then remove the
rear wheel shaft nut.
Fig. 5-2-3 Fig. 5-2-6
Fig. 5-2-4
-51-
5) Pull out the rear wheel shaft by striking it with
a plastic tip hammer.
Fig. 5-2-7