Yamaha GT1 Service Manual page 53

This tire gives the rider assurance of maximum perform-
ance and safety for both road riding and trail riding.
The front wheel brake size is 110 mm. x 25 mm.
14.33 x 0.98 in.). A labyrinth seal is installed between
the wheel hub and brake plate to provide a seal against
dust and water.
A. Removal
1)
Disconnect the brake cable at the front brake
lever.
Fig. 5-1-2
2) Disconnect both the brake cable and speedo-
meter cable from the front brake shoe plate.
Fig. 5-1-3
3) Remove the cotter pin.
Fig. 5-1-4
-47-
CHASSIS -
Front Wheel
4) Remove the front wheel nut.
Fig. 5-1-5
5) Loosen the front wheel axle lock bolt.
Fig. 5-1-6
6) Remove the front wheel axle
by
simultaneously
twisting and pulling out on the axle.
Fig. 5-1-7