Transaction Report - Sharp UX-B800 Operation Manual

Transaction Report

Transaction Report
This report is printed out automatically
after a fax is sent or received to allow
you to check the result. The machine is
initially set to print out the report only
when an error occurs.
♦
The Transaction Report cannot be
printed manually. To change the
condition for automatically printing out
Transaction Reports, see page 49
and "TRANSACTION LIST" on page
50.
Headings in the Transaction Report
SENDER/ The name or fax number of
RECEIVER the other machine.
START Starting time.
TX/RX Total time taken for
TIME transmission/reception.
PAGES Number of pages.
56
NOTE One of the following notes
will appear under NOTE to
indicate whether the fax was
successful, and if not, why it
failed.
OK - Transmission/reception
was successful.
P.FAIL - A power failure
prevented the transaction.
JAM - The printing paper or
document jammed.
BUSY - The fax was not sent
because the line was busy.
COM.E-X - (Where "X" is a
number.) A communication
error occurred. See page 61.
CANCEL - The fax was
canceled because the
was pressed, no document
was in the feeder, or the
other machine requested a
function that your machine
does not have.
STOP