Caller Id (Requires Service) - Sharp UX-B800 Operation Manual

programmed. Clear one of the keys
and then store a group.
4
Press the Group Key that you want
33/G1 34/G2
to use ( or
clearing a Group Key, press the
Group key that you want to clear
and go to Step 8.)
•
If [ALREADY STORED] or [RAPID #
STORED] appears, the key has
already been programmed. Clear the
key or try the other Group Key.
5
Select a destination using one of the
following methods:
•
Press a Rapid Key.
•
SPEED DIAL
Press and enter a 2-digit
Speed Dial number.
•
Press or
desired destination appears in the
display.
•
Press
(only for an e-mail
destination).
6
Press to enter the destination.
7
Repeat Steps 5 and 6 for each of
the other desired destinations
(maximum of 20).
•
You can press
and check your entered destinations.
To delete a destination, press
when it appears.
). (If you are
until the
, , or
to scroll through

Caller ID (Requires Service)

8
When you have finished entering
the destinations, press
STOP
9
Press to exit.
Caller ID
(Requires Service)
Important: To use this function, you
must subscribe to a Caller ID service
from your phone company. The
machine may not be compatible with
some Caller ID services.
If you subscribe to a Caller ID service,
you can have the machine show the
name and number of the caller when
you receive a call.
FUNCTION
1
Press , then
[
OPTION SETTING] appears
2
Press , then
[
CALLER-ID] appears.
3
Press (YES) to turn on Caller
ID. (To turn off Caller ID, press
and go to Step 7.)
STOP
4
Press to exit.
.
until
.
until
41