To Configure The Analyzer With Printers Or Plotters - HP 8753E Installation And Quick Start Manual

To Configure the Analyzer with Printers or Plotters
1. Connect your printer or plotter to the corresponding interface.
2. If you are using the parallel interface, press
[GPIO] or [COPY] appears.
Chapter 1
STEP 4. Configure the Analyzer
and until your choice of
Local PARALLEL
If you choose [COPY], the parallel
port is dedicated for normal copy
device use (printers or plotters).
If you choose [GPIO], the parallel
port is dedicated for general purpose
I/O. The HP 8753E controls the data
input or output, through the
sequencing capability of the
analyzer.
Installing Your Analyzer
11