To Test The Reflection Mode - HP 8753E Installation And Quick Start Manual

To Test the Reflection Mode
1. Connect the equipment as shown and
press .
Preset
3. To check the reverse reflection mode for
channel 1, press
measurement trace should be similar to the
trace shown below.
Chapter 1
, . The
Meas Refl: REV S22 (B/R)
STEP 5. Verify the Analyzer Operation
2. Look at the measurement trace displayed
on the analyzer. It should be similar to the
trace below.
4. If you are ready to start making
measurements, continue with the next
chapter "Quick Start: Learning How to
Make Measurements".
Installing Your Analyzer
25