Interlogix TruVision TVB-2402 Installation Manuals page 14

The camera has a built-in OSD button and supports
UtC (Up-to-Coax) control over both CVBS and TVI
outputs.
Using the buttons
Please press the
menu and select an OSD item.
Using a TVI output
Programming over the camera's TVI output can be
done via a TVI DVR.
Connect the TVI cable to the DVR, as shown below.
12
Menu button to call up the OSD
Press the button up/down
to move the cursor up or
down to an OSD item.
Press the button left/right
to move the cursor left or
right to adjust the value of
a selected OSD item.
Installation Guide