Setting A User Password; Figure 4-4: Menu Map To Password Setting - Honeywell XYR 5000 Series User Manual

Honeywell Industrial Wireless
Rev 5
08/06
The user may choose from A-Z, 0-9, a dash ("-"), and an underscore
("_"). The underscore has a special meaning to the software inside
the Transmitter. For example, if you have a Tag Name that is only 5
characters long, then you do not want to wait for the rest of the 16
characters to be displayed on the LCD. So if your Tag Name was
"TANK1", you would want to enter the Tag Name like this: "TANK1_
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _".
The Tag Name can also be entered via WMT. To do so, when the
software is in the Transmitter view (See Appendix A), right-click the
Transmitter icon, select Rename, and then enter the Tag Name you
wish the Transmitter to have.
This Tag Name will then be uploaded to the Transmitter and can be
displayed by pressing the ENTER button when the unit is in the
Operations Sequence (See Section 4.2.1 of this manual).
4.5.

Setting a User Password

Note Once WMT has been used to configure the Transmitter, this
menu option will be disabled on the Transmitter LCD Menu. See
Section 4.1 for more details.
Each Transmitter has a password that will lock out undesired users
from making changes to the Transmitter. Any user may still view
some of the Transmitter settings by pressing the ENTER key during
the Operations Sequence and viewing the Read-Only Sequence.
The password is a four-digit password. The factory default is 0000. If
you wish to select a different password, follow the Transmitter Menu
Map shown in Figure 4-4 to change it.

Figure 4-4: Menu Map to Password Setting

The password can also be configured via WMT. To do so, enter the
configuration dialog box (See Appendix A). From the configuration
dialog box click on the General tab to bring up the general
information as shown in Figure 4-5.
User Manual
Wireless Dual Discrete Input Transmitter
- 27 -