Honeywell XYR 5000 Series User Manual page 10

Honeywell Industrial Wireless
Warning! If the Transmitters have been running for an extended
period of time with no signal from the Base Radio (the Base
Radio is off or not present), the Transmitters will only search for
the Base Radio every one hour or so. Turning the Transmitters
off and back on will cause them to begin searching
immediately.
Rev 5
08/06
If the "RF OFF" message is being displayed on the Transmitter LCD,
perform the following:
•
Set the RF CHAN setting equal to the Base Radio's RF
Channel.
If "NO RF" is being displayed on the Transmitter LCD, check the
following:
•
Is the Transmitter set to the above listed configurations?
•
Is the Base Radio on?
•
Are the Transmitter and Base Radio set to the matching
configurations? (See Section 5 of the Transmitter and Base
Radio User Guides)
•
Are the Base Radio and Transmitters unable to communicate
due to obstructions or distance? (See Section 3.1.1 Transmitter
Positioning).
User Manual
Wireless Dual Discrete Input Transmitter
- 10 -