Honeywell XYR 5000 Series User Manual page 2

Honeywell Industrial Wireless
Switch Input Transmitter
Honeywell Inc.
Industrial Measurement and Control
2500 West Union Hills Drive
Phoenix, AZ 85027
Rev 5
08/06
Models WW591, WW592
Versions 1.70 or later
Important Information for the User
•
Changes or modifications not expressly approved by Honeywell
may void the user's authority to operate the equipment.
•
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired
operation.
•
This device is for mobile and fixed use only (not portable or
body-worn). A separation distance of 20 cm must be maintained
at all times between the antenna and the body of the user and
bodies of nearby persons.
•
This device has been designed to operate with an antenna
having a maximum gain of 9 dBd. Antenna having a higher gain
is strictly prohibited per regulations of Industry Canada. The
required antenna impedance is 50 Ohms.
•
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the EIRP
(Equivalent Isotropically Radiated Power) is not more than that
required for successful communication.
•
The installer of this radio equipment must ensure that the
antenna is located or pointed such that it does not emit RF field
in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's
website www.hc-sc.gc.ca/rpb.
FCC Certification
•
This product is a frequency hopping RF transceiver module for
the 900 MHz ISM band, designed to meet FCC 15.247, and is
used in industrial control and monitoring applications.
•
The antenna is factory installed and MUST NOT be removed or
modified by user.
User Manual
Wireless Dual Discrete Input Transmitter
Copyright 2006 by Honeywell International Inc.
Rev. 5-08/30/2006
While this information is presented in good faith and believed to be accurate, Honeywell
disclaims the implied warranties of merchantability and fitness for a particular purpose and makes
no express warranties except as may be stated in its written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The
information and specifications in this document are subject to change without notice.
® ®
Honeywell and TotalPlant are U.S. registered trademarks Of Honeywell International Inc.
Other brand or product names are trademarks of their respective owners.
- 2 -