Table of Contents
Advertisement
1
1. Backing pad
2. Spindle
3. Wrench
1
1. Sponge pad
2. Pad
1
3
2
1. Wool bonnet
2. Lock nut
3. Rubber pad
1
1. Lock nut wrench
2. Wrench
Installing or removing backing pad
004421
Hold the spindle with the wrench so that it cannot revolve. Then screw the pad
onto the spindle all the way. (The pad can be used to install the optional
2
sponge pad.)
To remove the pad, follow the installation procedure in reverse.
3
Installing or removing sponge pad
004422
To install the sponge pad, first remove all dirt or foreign matter from the pad.
Install the sponge pad to the pad.
To remove the pad, pull it off from the pad slowly.
2
Installing or removing the wool bonnet
004424
Mount the rubber pad onto the spindle. Screw the lock nut onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so that it cannot
004425
revolve, then use the lock nut wrench and securely tighten clockwise.
2
7
Advertisement
Table of Contents
