Ieee 1394 Jack; S-Video Out Port; Universal Serial Bus Ports; Headphone Jack - Fujitsu P2110 Manual

IEEE 1394 Jack

The 1394 port allows you to connect devices that are compliant with IEEE standard 1394. This port is
effectively a very fast communications port. In order to connect a 1394 device, follow these steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
* Some digital devices - such as digital cameras use IEEE 1394 ports for fast transfer of digital
files and data.

S-Video Out Port

The S-Video port allows you to connect and use directly any S-Video device, such as a VCR or
television. The S-Video standard provides for a higher quality picture than NTSC or PAL. In order to
connect an S-Video device, follow these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
When S-Video is connected, you can toggle the S-Video device on and off by pressing the [F11] key
while holding down the [Fn] key.

Universal Serial Bus Ports

The Universal Serial Bus ports (USB) allow you to connect USB devices such as external game
pads, pointing devices, keyboards and/or speakers. In order to connect a USB device follow these
easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.

Headphone Jack

The headphone jack allows you to connect headphones or powered external speakers to your
notebook. Your headphones or speakers must be equipped with a 1/8" (3.5 mm) stereo mini-plug. In
order to connect headphones or speakers follow these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
Critical Point
If you plug headphones into the headphone jack, the built-in stereo speakers will be disabled.
55