Device Ports; Vga/Lan Adapter Port; Lan Port; External Video Port - Fujitsu Lifebook Q2010 User Manual

Q2010.book Page 36 Wednesday, May 24, 2006 1:36 PM
L i f e B o o k Q 2 0 0 0 S e r i e s U s e r ' s G u i d e

Device Ports

Your LifeBook notebook comes equipped with multiple
ports to which you can connect external devices. Addi-
tionally, there are a number of ports on the optional
Docking Station to which you can attach devices (See
Optional Docking Station on page 38 for more informa-
tion).

VGA/LAN ADAPTER PORT

The VGA/LAN Adapter Port allows you to connect the
mini-adapter for plugging in an external video device or
an RJ-45 LAN device. Plug the mini-adapter into the
VGA/LAN Adapter Port on the right side of the system
(Figure 4-5).

External Video Port

Figure 4-5. VGA/LAN Adapter

LAN PORT

The LAN port on the VGA/LAN adapter allows you to
connect a LAN (RJ-45) cable for high-speed network or
broadband connections (e.g., DSL, cable modem). To
connect a LAN device to the adapter:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
EXTERNAL VIDEO PORT
The external video port on the VGA/LAN Adapter
allows you to connect an external monitor or LCD
projector. In order to connect an external device follow
these easy steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
3. Tighten the two hold-down screws, located on each
end of the connector.
Pressing the [Fn] + [F10] keys allows you
to change your selection of where to send
your display video. Each time you press the
key combination, you will step to the next
choice, starting with the built-in display
panel only, moving to the external device
only, finally moving to both the built-in
display panel and an external video device.
36

IEEE 1394 JACK

The 4-pin IEEE 1394 jack is a high-speed interface (400
Mbps) that can be used to transfer large amounts of data
between your notebook and an IEEE 1394 peripheral
such as a digital camera, external hard drive, or video
camera. Hot-swappable and plug-n-play, it is much
faster than USB 1.1, CardBus, or parallel port. To
connect a 1394 device, follow these steps: (Figure 4-6)
LAN (RJ-45) Port

UNIVERSAL SERIAL BUS (USB) 2.0 PORTS

The two Universal Serial Bus (USB) 2.0 ports allow you
to connect USB devices such as game pads, pointing
devices, keyboards and speakers. The USB 2.0 ports are
located on the right side of the system. (Figure 4-7).
USB 2.0 is downward-compatible with USB 1.1 devices,
so older USB devices will work with these ports. USB 2.0
is a much faster design, running forty times faster than
USB 1.1. To connect a USB device follow these steps:
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
Figure 4-7. Connecting a USB Device
IEEE 1394 Port
Figure 4-6. IEEE 1394 Interface
The 1394 port in this system uses a four-
pin configuration. If you intend to
interface with devices which have a six-pin
configuration, you will need to purchase
an adapter.
USB Ports