Fujitsu P2110 Manual page 30

2 Windows Keys
Your LifeBook notebook has two Windows keys, consisting of a Start key and an Application key.
The Start key displays the Start menu. This button functions the same as your onscreen Start
menu button. The Application key functions the same as your right mouse button and displays
shortcut menus for the selected item. (Please refer to your Windows documentation for additional
information regarding the Windows keys.)
3 Cursor Keys
The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up,
down, left and right in applications. In programs such as Windows Explorer, it moves the "focus"
(selects the next item up, down, left, or Fn Key Windows.
4 Function Keys
Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these
keys differ for each application. You should refer to your software documentation to find out how
these keys are used.
The [Fn] key provides extended functions for the notebook and is always used in conjunction with
another key.
[Fn+F3]
Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.
[Fn+F4]
Pressing [F4] while holding [Fn] will toggle the Quick Point feature on and off. Note that the
[Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See "Entering the
BIOS Setup Utility")
[Fn+F5]
Pressing [F5] while holding [Fn] allows you to toggle between video compensation and no
compensation. (Video compensation controls spacing on the display. When it is enabled,
displays with less than 1280 x 768 or 800 x 600 pixel resolution will still cover the entire
screen.)
[Fn+F6]
Pressing [F6] repeatedly while holding [Fn] will lower the brightness of your display.*
[Fn+F7]
Pressing [F7] repeatedly while holding [Fn] will increase the brightness of the display.*
[Fn+F8]
Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your LifeBook
note]book.**
[Fn+F9]
Pressing [F9] repeatedly while holding [Fn] will increase the volume of your LifeBook
notebook.**
[Fn+F10]
Pressing [F10] while holding [Fn] allows you to change your selection of where to send your
display video. Each time you press the combination of keys you will step to the next choice.
The choices, in order, are: built-in display panel only, both built-in display panel and external
monitor or external monitor only.
[Fn+F11]
When a television is connected via the S-Video port, pressing [F11] while holding [Fn] will
toggle the display on and off.
* There are eight brightness levels.
** There are 17 audio levels.
13