Sharp AL-1551 Operation Manual page 23

Ensure that the desired paper tray is selected.
5
G
Paper sizes that can be used in the duplex copy mode are letter, legal, and
invoice. (When copying from the original table in the duplex copy mode, only
letter size paper can be used.)
G
The bypass tray cannot be used in the duplex copy mode.
Set the number of copies using the two copy quantity (
6
from the original table or copying in a 1-sided copy mode from the RSPF.
G
Press the clear (
G
A single copy can be made with the initial setting, i.e., when "0" is displayed.
ZOOM
Tens digit Unit digit
Press the print (
7
G
To display the number of copies made in a continuous run, press the left
copy quantity key.
G
To stop copying in the middle of a run, press the clear (
stop and the number in the display will be reset to "0".
200%
MAX.
129%
5
100%
100%
78%
8
64% 8
50% MIN.
) key to clear an entry if a mistake is made.
G
Press the right copy quantity key to set the unit
digit from 0 to 9. This key will not change the
tens digit.
G
Press the left copy quantity key to set the tens
digit from 1 to 9.
) key.
NORMAL COPYING
1 1 1
/ x 8 / 8 / x 11
2 2 2
1 / 14 8 1 / 11
x x
2 2
1 / 11 5 1 / 8 1 /
x x
2 2 2
ZO
, ) keys when copying
) key. Copying will
3
21