Sharp AL-1551 Operation Manual page 16

LOADING COPY PAPER
Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the
2
arrow to remove it while pressing down the pressure plate of the paper tray.
2
Store the pressure plate lock which has been removed in step 2 and the screw which
3
has been removed when unpacking (see page 11, step 2 of REMOVING PROTECTIVE
PACKING MATERIALS) in the front of the paper tray. To store the pressure plate
lock, rotate the lock to fix it on the relevant location.
Pressure plate lock
Adjust the paper guides on the paper tray to the copy paper width and length.
4
Squeeze the lever of paper guide
paper.
Move paper guide
Fan the copy paper and insert it into the tray. Make sure the edges go under the
5
corner hooks.
14
to the appropriate slot as marked on the tray.
Paper guide B
Do not load paper above the maximum height line (
will cause a paper misfeed.
Screw
and slide the guide to match with the width of the
Paper guide A
). Exceeding the line