MISFEED REMOVAL
Rotate the feeding roller in the direction of the arrow and gently remove the misfed
3
paper from the exit area.
Raise the fusing unit release lever, close the front cover and then close the side cover
4
by pressing the round projections near the side cover open button. The misfeed (
indicator will go out and the ready (
6
D Misfeed in the lower paper feed area
Open the lower side cover (under the bypass tray) and remove the misfed paper.
1
If
pull out the lower paper tray and remove the misfed paper. Then close the lower paper
tray.
Close the lower side cover.
2
Close the side cover by pressing the round projections near the side cover open
3
button. The misfeed (
up.
38
When closing the covers, be sure to close the front cover securely and then
close the side cover. If the covers are closed in the wrong order, the covers
may be damaged.
blinks and the misfed paper is not seen from the area of the lower side cover,
) indicator will go out and the ready (
Feeding roller
) indicator will light up.
)
) indicator will light