Hardware Installation; Preparation; Separating Base And Top; Installing Local Storage - Bosch FLEXIDOME IP starlight 8000i Installation Manual

14 en | Hardware Installation
4

Hardware Installation

Caution!
Do not attempt to move the camera lens manually. Do not remove the bubble.
The lens system is motorized for easy commissioning. Moving these parts manually will break
the gears and damage the camera. In order to move or focus the camera lens, always use the
commissioning apps mentioned in this manual.
Installation overview
The hardware installation of the camera summarizes in six main steps:
1.
2.
3.
4.
5.
6.
4.1

Preparation

4.1.1

Separating base and top

On delivery, camera top and camera base are fixed together. In order to proceed with the
installation, base and top need to be separated.
Prerequisites:
–
–
Steps:
1.
2.
3.
4.
5.
4.1.2

Installing local storage

Notice!
Local storage on memory cards should only be used for alarm recording. To minimize the risk
of losing information, use multiple, redundant recording systems and a procedure to back up
all digital information.
Up to two local memory cards (SD) can be installed in the camera top.
Prerequisites
–
–
Steps
1.
2.
2018.11 | 01 |
Prepare the camera
Install the surface mounting plate
Prepare the on-site wiring
Install the camera's base
Connect all wiring
Plug-in and fix the camera top to the base
Camera unpacked
TR20 bit mounted to screwing device
Place the camera on a horizontal surface, with the flat bottom of the base facing to the
ground.
Use the provided TR20 security bit to unfasten the four screws, visible in their mounting
holes on the camera top. Do not use any 'similar' looking torque bit.
Note: do not unfasten the screws from the camera top. A second screw thread in the
camera top prevents the screws from falling down when doing an overhead installation.
Lift the camera top off the base.
Set the camera top aside for now.
The camera top, detached from the base
One or two SD memory cards
Carefully turn around the camera top. The bubble faces down.
Locate the SD slot on the backside of the camera top.
Installation Manual
FLEXIDOME IP starlight 8000i
Bosch Security Systems