Grounding - Bosch FLEXIDOME IP starlight 8000i Installation Manual

FLEXIDOME IP starlight 8000i
Pin assignment
Pin
1
2
3
4
5
6
7
8
9
10
Tab. 4.1: Pin assignment for 10-pin terminal
After fitting the terminal to an on-site wiring, the connection can easily be made. Plug the
terminal into the 10-pin I/O on the camera base.
Figure 4.2: Connectors on the base
4.3.2

Grounding

The camera is double-insulated and does not need grounding. However, grounding provides
improved surge protection (up to 1 kV).
The grounding connector suits cable diameters from 1 mm up to 4 mm. The following graphic
illustrates the position of the grounding connector:
Steps:
Warning!
Trained electricians only!
Work at electric appliances must only be carried out by qualified technicians.
1.
Bosch Security Systems
Connection
12 V out
GND
ALARM OUT
ALARM OUT
GND
ALARM IN 1
ALARM IN 2
GND
AUDIO OUT
AUDIO IN
1 10-pin connector
3 12 VDC/24 VAC connector
Remove any power source from the device.
2 RJ45 Ethernet/PoE connector
Installation Manual
Hardware Installation | en
2018.11 | 01 |
21