Invacare G5510 User Manual page 32

4 EMC INFORMATION
Recommended separation distances between portable and mobile RF communications equipment and
The G 5510 Bed is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the
G 5510 Bed can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the G 5510 Bed as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
®
Invacare G5510 Bed
the G 5510 Bed
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
P
d=1.2
.12
.38
1.2
3.8
12
32
m
80 MHz to 800 MHz
P
d=1.2
.12
.38
1.2
3.8
12
800 MHz to 2,5 GHz
P
d=2.3
.23
.73
2.3
7.3
23
Part No 1180159