Invacare G5510 User Manual page 50

6 DEALER SECTION - PACKAGING, HANDLING, AND SET-UP
WARNING!
Risk of Injury or Damage
To avoid injury or damage while assembling:
DO NOT place your hand between the section and the bed end.
3. Tilt the bed end toward the head section and place the rivets into the corner locks (Detail "A").
4. Return the bed end to its full upright position. The head section rivets will lock into place (Detail "A").
5. Repeat the same procedure for other bed end (Detail "B").
Removing
1. While holding the bed end at the foot of the bed, lift up on the foot section and disengage the rivets out of the corner locks (Detail "B").
2. Place the bed end and foot section on the ground.
3. While holding the bed end at the head of the bed, lift up on the head section and disengage the rivets out of the corner locks (Detail "A").
Bed End
Head Section
Rivets
Corner Locks
®
Invacare G5510 Bed
DETAIL "A"
FIGURE 7 Installing/Removing the Bed Ends
DETAIL "B"
50
Bed End
Foot Section
Rivets
Corner Locks
Part No 1180159