Canon Color iR C3480 Service Manual page 668

Sub item
PTN-LVL Half-tone image edge lateral streaks countermeasure mode
This changes the amount of toner which is discharged.
Lateral streaks sometimes appear when printing half tones on the edges of images in an L/L environment. Increment the
setting by 1 when these streaks appear. The disadvantage of doing this is the increase in the toner consumption. The
setting can be decremented by 1 when half tones are not going to be printed on the edges of images and/or when users
who are not bothered by the streaks want to reduce the toner consumption.
Setting range: -1 to 1
[Factory setting/value after clearing RAM: 0]
SJOB-CL Switch for enabling scan job cancellation by logout
To enable scan jobs to be canceled upon completion of the scanning operation if logout is initiated.
When used
When the user asks for the item to be provided.
Settings
0: Canceling is disabled.
1: Canceling is enabled.
operation procedures
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
[Factory setting/value after clearing RAM: 0]
TNR-WARN Low remaining toner warning display ON/OFF
This switches the low remaining toner warning between ON and OFF. Set it to "1" if the toners are to be replaced after
they have all been used up.
Settings
0: The warning is displayed.
1: The warning is not displayed.
[Factory setting/value after clearing RAM: 0]
IFX-CHIG Setting of character count for ignoring IFAX received mail text
When the text of a mail during IFAX reception is shorter than the number of characters set, it is ignored, and the text is
neither printed nor sent.
If the mail text has been lost as a result of setting the value to a number other than "0", and there is no attached TIFF file,
a blank page (except the header and footer) will be printed and sent.
* Kanji are treated as 2-byte characters, and the carriage return and other control codes are also included in the character
count.
Settings
0 to 999 (unit: number of characters)
0: The mail text is not ignored.
[Factory setting/value after clearing RAM: 0]
SCANTYPE Switch the reader type
Switch the settings depending on the connected reader type.
Setting value
0: When connecting the Color image Reader E1/F1
1: When connecting the Multi Color image Reader G1
[Default: 0]
DNSTRANS Switching the priority of DNS transfer
Determine the priority of protocol (IPv4/IPv6) used for DNS inquiry based on the DNStrans value.
Setting range
0: ipv4, 1: ipv6
Method of Adjustment
When DNS query is first executed for IPv6 in the environment where both IPv6 and IPv4 are used and the DNS server
only supports IPv4, timeout occurs and it takes time. In such a case, execute this mode to set priority to IPv4.
HPFL-DSP Switching the display of auto gradation adjustment heavy paper half-speed mode
Display the buttons for other than Plain on the screen of Auto Gradation Adjustment in user mode.
Use Case
Switch the button displayed on the screen of Auto Gradation Adjustment according to the usage status (paper/1200dpi).
Setting values
0: Plain (Full Adjust / Quick Adjust)
1: Plain and Coated (Heavy 1)
2: Plain and 1200dpi
3: Plain and Standard (Heavy 1 / Heavy 2)
[Factory setting / Value after clearing RAM: 0]
FAXADCHK Setting the number of times for checking FAX address entry (This is provided for Mizuho Bank.)
Specify "N times" for setting the number of times to check FAX address entry.
Setting range
0-9 (Default: 2)
Perform checking of address entry for multiple times to prevent a mistake in FAX address entry. Actual number of times
for checking FAX address entry can be specified.
[Factory setting value / Value after execution of RAM clear: 2]
FCID-SW Switching the forcible ID printing function (This is provided for Mizuho Bank.)
Add a function to forcibly print ID information in which an authentication ID is converted a little bit like a function of
expanding the number of copies.
Adjustment range
0: Perform the function, 1: Do not perform the function
[Factory setting value / Value after execution of RAM clear: 0]
COPIER>OPTION>BODY
Description
Chapter 17
level.
1
1
1
1
1
1
1
1
1
17-65