Connect Cd/Dvd-Rom Drive; For Analog Cd Audio Output; For Digital Cd Audio Output - Creative Audigy 2 ZS Platinum User Manual

Step 8: Connect CD/DVD-ROM drive

For analog CD audio output:

Connect an Analog CD audio cable (available separately) from the Analog Audio connector on your CD/DVD-ROM drive to the
CD_IN connector on the Audigy 2 ZS audio card.

For digital CD audio output:

Connect the Digital CD audio cable from the Digital Audio connector on your CD/DVD-ROM drive to the CD_SPDIF connector on
the Audigy 2 ZS audio card
Note
If you connect both an analog and digital audio cable at the same time, do not select both the CD Audio or CD Digital option in
Surround Mixer.
Using Digital CD Audio Extraction, audio can be sent to your computer through your CD or DVD drive's IDE cable instead of via an
analog or digital SPDIF cable. See
Windows 98 SE users can listen to audio CDs via Windows Media Player 7.x or later, using the Digital Playback option. Your
CD/DVD-ROM drive must support sustained digital reads. Read the Media Player help for more information.
1. CD/DVD-ROM drive
2. Analog CD Audio cable (available separately)
3. Digital CD audio cable
"Digital CD Audio Extraction" if you wish to use this feature.
Component